One of the best cleaning processes available to mankind in blasting. Today, there are numerous kinds of blasting processes in use. These processes include, hydro, sand, sponge, dry ice, glass and shot blasting. Each kind of blasting technique is named according to the media used for the job. There are methods that have been in existence for a long time while others were invented recently. When one needs Media Blasting Services PA offers the perfect location to visit.
The different blasting operations are suited for different surfaces because the abrasive power varies from one material to another. Some surfaces are able to withstand more abrasive force whereas others should be handled with care because they are fragile. Some operations are not possible or safe because of the nature of some surfaces. It is in cases of this kind that special blasting operations like sponge blasting are introduced.
This is a very special kind of operation that entails the use of sponge as the abrasive media. Sponge is a very soft material and is thus not capable of causing any damage to the surface it is used on. The softness of the abrasive makes this technique very suitable for delicate and sensitive surfaces. A wide range of sponge has been invented over the years to suit different applications.
There are different sizes and grades of sponge media. The nature of the surface being cleaned usually determines the choice of size and grade of the media to be used. Usually, the media is mixed with air to create adequate pressure. This mixture is then propelled towards the surface being cleaned through a nozzle. The sensitivity of a surface determines the level of pressure contained in the media.
Sponge blasting has a lot of advantages associated with it, making it preferable and useful in various applications and circumstances. One such application is the cleaning of components in substations and power stations. Sponge is useful in such cases because it does not conduct electricity or heat. Therefore, it is a suitable method for cleaning electrical devices without risk.
In substations and power stations, this method is used to clean electrical components in-situ. That means that the components do not need to be moved for them to be cleaned. The item stays in its position as it is cleaned. This process also finds a lot of use in the preparation of surfaces for painting. The media removes any surface dirt to form a clean surface that can achieve a high level of adhesion with paint.
Emission of duct in this process is very low compared to other methods. This is good for workers and the environment because there is reduced pollution. Since production of dust is low, clear visibility is maintained in the workplace at all times. This improves safety. Low ricocheting also improves safety of the person operating the machine.
The process uses material that is ninety-five percent recyclable. This implies that the material used in the process is collected and recycled so that it can be used for blasting again. This significantly lowers the cost of operation. In addition, this simplifies the cleanup process at the site of work.
The different blasting operations are suited for different surfaces because the abrasive power varies from one material to another. Some surfaces are able to withstand more abrasive force whereas others should be handled with care because they are fragile. Some operations are not possible or safe because of the nature of some surfaces. It is in cases of this kind that special blasting operations like sponge blasting are introduced.
This is a very special kind of operation that entails the use of sponge as the abrasive media. Sponge is a very soft material and is thus not capable of causing any damage to the surface it is used on. The softness of the abrasive makes this technique very suitable for delicate and sensitive surfaces. A wide range of sponge has been invented over the years to suit different applications.
There are different sizes and grades of sponge media. The nature of the surface being cleaned usually determines the choice of size and grade of the media to be used. Usually, the media is mixed with air to create adequate pressure. This mixture is then propelled towards the surface being cleaned through a nozzle. The sensitivity of a surface determines the level of pressure contained in the media.
Sponge blasting has a lot of advantages associated with it, making it preferable and useful in various applications and circumstances. One such application is the cleaning of components in substations and power stations. Sponge is useful in such cases because it does not conduct electricity or heat. Therefore, it is a suitable method for cleaning electrical devices without risk.
In substations and power stations, this method is used to clean electrical components in-situ. That means that the components do not need to be moved for them to be cleaned. The item stays in its position as it is cleaned. This process also finds a lot of use in the preparation of surfaces for painting. The media removes any surface dirt to form a clean surface that can achieve a high level of adhesion with paint.
Emission of duct in this process is very low compared to other methods. This is good for workers and the environment because there is reduced pollution. Since production of dust is low, clear visibility is maintained in the workplace at all times. This improves safety. Low ricocheting also improves safety of the person operating the machine.
The process uses material that is ninety-five percent recyclable. This implies that the material used in the process is collected and recycled so that it can be used for blasting again. This significantly lowers the cost of operation. In addition, this simplifies the cleanup process at the site of work.
About the Author:
Get in touch with the media blasting services PA companies rely on by touring our web pages now. To learn more about our janitorial services and our options in dry ice blasting, take a look at http://www.asmenvironmental.com today.
No comments:
Post a Comment